Address
Malik Saleem Plaza, New City, Wah
Pakistan
WhatsApp: +92 327 510047
Email: info@developmech.com
Work Hours
Monday to Friday: 3PM - 11AM
Weekend: 10AM - 5PM
The radio, the video, even the ID can be switched off. The blades cannot, and that is where drone detection actually begins. Developmech | Structural, Fatigue, Flow, Thermal and Acoustic Engineering Analysis Most discussions about counter-drone detection focus heavily on…
How to spot a stress singularity in your FEA results Developmech | Engineering Analysis & Simulation The number that doubles when you “improve” your model You run a finite element analysis on a loaded steel bracket. The peak von Mises…
An injection molded part shrinks, warps, sinks, and knits as the plastic flows and cools, so the mold has to be cut for what the plastic does, not for the part you drew Developmech | Flow, Thermal & Tooling Analysis…
A sheet metal weldment springs back from every bend, distorts as the welds cool, buckles when it is thin, and cracks at the weld toe, so the part that comes off the bench is never quite the one on the…
A 3D model is nominal, perfectly rigid, and defect free, and the real part is none of those, so every idealization in the model is a place the part bites back Developmech | Design, Simulation & Tolerance Analysis A 3D…
The difference that matters between aluminium and steel is not weight, it is that steel has a stress it can survive forever and aluminium does not, plus five more that decide which to use Developmech | Fatigue, Materials & Structural…
A metal 3D printed part is built from melted layers, and it inherits anisotropy, porosity, locked in residual stress, and a rough skin that decide where it cracks long before the alloy does Developmech | Fatigue, Residual Stress & Materials…
A centrifugal pump is a fluid machine that cavitates, tears at its own vanes, cooks its seal, and loads its bearings, and only one of the ways it dies is ordinary wear Developmech | Flow, Structural & Reliability Analysis A…
A spring is a torsion bar wound in a circle, and it fails by fatigue, surge, relaxation, buckling, and coil clash, most of them nothing to do with the load it was sized for Developmech | Fatigue, Vibration & Durability…
An exhaust system is a thermal fatigue and acoustic structure that heat cycles, resonates, and corrodes, and it cracks at the flex and the welds long before it simply rusts away Developmech | Thermal, Fatigue & Acoustic Analysis An exhaust…